This is a third part of Hosting Cisco Phone Files on TFTP Server, to make Cisco Phones work with SIP Server such as Asterisk / Elastix.
You can Download the third part from here: CONVERTING CISCO 7940 PHONES TO WORK WITH ASTERISK- Elastix -Part III
Thanks,
Salman Aftab
This is the second part of three part series. In this part we will setup DHCP Server on our Linux box. This DHCP will provide automatic IP addresses to our Cisco Phones.(If it’s set to YES)
So Lets setup a simple DHCP Server on Linux.
You can Download the Pdf from here Setting up Linux TFTP Server for Cisco Phone Files -Part II
Don’t forget to Comment
Thanks,
Salman Aftab
Hey Guys this time its Linux and Cisco working hand to hand. This post is kind of a multipost and consist of :
1. TFTP Server Setup on CentOS 6.4
2. DHCP Server Setup on CentOS 6.4
3. Hosting Cisco Phones Firmware on TFTP Server
4. Converting SCCP to SIP to use Cisco VOIP Phones with Elastix.
At the End of this Tutorial we would be able to setup working Cisco VOIP Phones with Elastix / Asterisk.
You can Download Part -I from here Setting up Linux TFTP Server for Cisco Phone Files-I
Please comment,
Thanks,
Salman Aftab
www.itpings.com
Why Convert SCCP to SIP ?
The reason i am writing this article is to draw a clear picture of simple method used to convert SCCP cisco protocol to SIP protoco so that we could use Cisco Phones with Opensource PBX such as Elastix/ Asterisk.
My Article is based on Simple steps and by following it properly you would be able to convert the protocol in no time. But first let me show you some important keys: